Browse By

How to make winter shoes non-slip?

When buying winter shoes, women and men usually pay attention to the external characteristics – the model, the material, the way the shoe sits on the foot. The sole, of course, is also subjected to inspection, choosing the most convenient and practical relief, but the non-slip qualities of the shoe base are given minimal attention, and in vain – during ice, it is this quality of footwear that becomes as relevant as possible.

Is it possible to immediately choose a non-slip model of shoes, shoes and boots and how to make shoes non-slip – these are two main questions that we will deal with in this article.

The content of the article

Before turning to tips on how to make the sole of a shoe already purchased with a non-slip, let’s look at the question, is it possible to immediately buy a shoe pair that can be stable on slippery ice?

Here are some tips about this give manufacturers of shoe products:

How to make winter shoes non-slip?
  • When choosing winter models of boots or shoes, always pay attention to the tread. It must be tall and have various elements on its inner surface – most often, in the form of geometric shapes. It is these elements that are responsible for more stable adhesion of the sole to the road surface;
  • Look also at the base material: rubber and leather will be the most slippery varieties, polyurethane and thermopolyurethane are the most resistant for movement on ice;
  • Take a stability test: bend a boot or shoe in the plantar area. If the fold was easy – the shoe will slip. If it is impossible to bend the product, the sole is non-slip;
  • It is almost impossible to choose beautiful and non-slip women’s boots, consider as a fall-back in case of strong ice, semi-sports shoes on a flat base or fur boots and uggs. Such models are usually equipped with a stable tread, and therefore in it you will not be afraid of ice.

But what to do if you have already acquired a comfortable and fashionable pair and everything in it is good, except that it glides awfully on ice? Gaining from a stalemate can advice given in the next section of the article.

The simplest answer to the question of how to make ice-resistant, completely non-slip winter shoes will be as follows: on the eve of the ice season, take the boots or shoes to a shoe shop and a professional shoemaker will reinforce special anti-slip pads on the sole. Such linings are made of polyurethane or rubber.

How to make winter shoes non-slip?

If you want to save – buy these stickers against sliding in the store and stick them to the sole.

Note that the pads are matched in size as follows – the first size is suitable for shoes or boots of 35-38 size, the second – for a row with values 39-41, and for sizes from 42 and above, stickers with a third size will do.

The convenience of such linings is that they can be used not only on a footwear with a flat base, but also for boots with a heel and with a different form of heel. In addition, there are options, adhesive, and there is a kind of pads on the removable spikes, which can be worn as needed.

We give detailed instructions on how to glue the pad of ice on the plantar surface at home. The sole of the shoe must be thoroughly cleaned of all impurities, dried and treated with an alcohol solution to degrease the surface.

Glue to the lining is usually included, but you can use any adhesive composition for shoes. Apply the glue evenly on the plantar base, press firmly on the sticker and hold for about one minute. Let the glue dry and use your favorite shoes and boots without fear of falling on slippery ice.

How to make winter shoes non-slip?

Useful in the problem of how to make the sole of the shoe completely non-slip can also be tips from the piggy bank of popular wisdom. For example, sole stability can effectively enhance conventional adhesive tape. True, you need to choose a coarse tissue variety of material, and not a thin bactericidal plaster.

Cut two medium-sized pieces of plaster and glue one of them from the toe side of the toe, and the other strengthen in the heel area.

Adhesive plaster reduces slipping shoes on ice, but it wears out quickly, so you will occasionally have to update pieces of material on the sole. To prevent the patch from appearing, you can paint it with a waterproof black marker or shoe paint before sticking it.

Coarse felt can be the equivalent of a patch. Cut felt pieces to fit the size of the shoe and glue to the toe and heel. Felt withstands friction with the surface and allows you not to slide on it, even in conditions of strong ice.

You can try the following method: wash the shoe soles so that they do not leave dirt, dry or wipe the surface thorough. Take a tube of glue ” Moment ” or ” Superglue ” and apply on the base with small zigzags or mesh. Before the glue has dried, sprinkle coarse sand over it.

How to make winter shoes non-slip?

Shoes can not be used for several hours, as the sand must stick properly to the glue. This handicraft anti-slip sticker lasts for about 3-4 days of regular wearing of boots or shoes, after which the procedure will have to be repeated.

If your boots or shoes have a grooved base, then you only have to wash them more often and the effect of slipping on ice will noticeably decrease.

» по любой скользкой поверхности. This happens because when the relief protrusions of the shoes or boots are densely clogged with mud, the plantar base flattens out and begins to “ ride ” on any slippery surface. A simple care procedure successfully eliminates this effect.

If the very idea of dressing model boots with sand, plaster or felt hinders you, try the following technology: take fine sandpaper and rub it on the plantar base with force. Boots will slip less.

Not bad, but requiring some dexterity option to make shoes sustainable, is as follows. Take an old pair of shoes with a good grooved base and cut the corrugated layer with a shoemaker, trying to make it come out as thin as possible.

Now pick up the shoes that you want to make non-slip. Process the plantar base of fashionable boots or shoes with a thick layer of silicone (at least 5 millimeters) and attach a cut relief pattern. You need to apply with effort, so that the picture is imprinted in a layer of silicone.

How to make winter shoes non-slip?

Remove the homemade stencil and dry the silicone pattern with a hair dryer. So with your own hands and in a short time you can create an anti-slip protector on boots or shoes.

Craftsmen also claim that raw potatoes help lower the slip of the plantar base on the ice. To do this, take one root vegetable, cut it in half and rub the cut surface of the toe and heels.

Most carefully it is necessary to apply the following folk method, in which the surface of the sole is scratched with a nail or other sharp improvised means. The base of it, of course, becomes grooved and less slippery, but if you try too hard, you can spoil your favorite and beautiful couple. Non-slip winter for you, warm and stable boots!

How to make winter shoes non-slip?

Leave a Reply

Your email address will not be published. Required fields are marked *